| Re: Re : Re: Printing bug [wiadomość #253 jest odpowiedzią na wiadomość #252] |
Mon, 26 February 2018 15:11   |
|
|
Hello Andy !
I dont sure if I proper understand your need .
QSL manager only services QSL with one QSO on a one QSL card .
If answer is yes for this question , then you cannot use template
for three QSO. Because my program when find QSO for this same station
put this QSO on one QSL { up to three QSOs there } .
Must use obligatory template for one QSO on QSL .
The better will be when you send to my e-mail scan for rear your QSL
{may be any format - I preffer .bmp }
and give me exactly ( with 0,5 mm accuracy) , dimension your QSL card ( usually 140 x 90 mm)
Then I design for you template with use BAND , not FREQUENCY .
The time for design this template is short , and is shorter than write this post .
In a directory PATTERN_FOR_PRINT is present template for one QSO on QSL card :
1. QSLScan_1QSO.LBL with use type field ONLY FIELDS .
2. QSLScan_Table_1QSO.LBL with use type field TABLE WITH FIELDS .
This above 2 template use field FREQUENCY .
In my program is present this possibility :
-if for example you get from the printing house QSL card a little
bit smaller or bigger then you can before printing, move printing a few millimeters
horizontally or vertically..
Vy 73 de Jerzy SP9AUV
Pozdrawiam - Best regards Vy 73 de Jerzy SP9AUV - admin FUDFORUM
|
|
|
|
FORUM dla wymiany doświadczen uzytkowników programów SP9AUV i innych problemów w krótkofalarstwie
Użytkownicy
Szukaj
Pomoc
Zarejestruj się
Zaloguj się
Strona główna
